• Navigation projection: This product is an optical projector. Place the navigation device (mobile phone or navigator) on the support platform of the product, and set the navigation device to "HUD navigation mode". Project the image on the navigation device onto the lens. This eliminates the need to look down at the navigation screen to improve driving safety.
• Mobile phone stand: At the same time, it is a unique stand that can replace the traditional suction cup bracket.
• Angle adjustment: The display panel can be rotated 180 degrees freely, making it easy to select the correct viewing angle.
• Transparent display: The display will not block your view when navigating.
• Easy to install: the bottom is secured with a silicone pad.
• Non-slip shock absorption: The elastic shrink clip prevents the phone from being dropped during driving.
Support models: adapt to various vehicles
Fixing method: non-slip mat
Body material: ABS + plexiglass
Compatibility: Support 7-inch screen mobile digital products
Wireless charging function description:
Input: DC 9V/1.5~2A
Output: DC 9V±0.1V
Best Sensing Distance: 2mm-4mm（Max:10mm）
Applicable models: Apple/Samsung/Millet/Huawei mobile phone models compatible with wireless charging standards
Wireless charging instructions:
1. Connect the power supply using a USB cable. When the indicator is lit, the product goes into standby.
2. Make sure your phone supports the QI standard wireless charging function. If it is not supported, you need to purchase a wireless charging receiving patch that matches your mobile phone to implement the wireless charging function.
3. Adjust the circular column above the main unit according to the size of your mobile phone. Turn the circular column to the right to loose (can move back and forth), move the appropriate position forward and backward according to the size of the phone, then tighten to the left. .
4. Use the side of your mobile phone to hold the elastic shrink clip on the top of the main unit, and then press the mobile phone to lock it. The mobile phone should be placed in the center of the main unit to ensure that the mobile phone receiver and the host's transmitter are in the 10MM range.
5. In the case of strong sunlight during the daytime, the main unit can be rotated forward by about 90 degrees to adjust to the best direct viewing angle, so that the host can be converted into the ordinary mobile phone bracket mode, and the mobile phone screen can be displayed directly.
①Wireless without base【Without charging (non-slip mat)】
②Wired without base【10W fast charge (non-slip mat)】
1, This product is an optical projector and cannot run APP software.
2, the product has two models: with wireless charging function, without charging function. Please choose carefully;
3, the product has a wireless charging function, only for devices with wireless charging function can be effectively charged.
Projection usage settings:
1, Open the phone map app
2, Set the destination, start navigation, put the phone horizontally, turn on the phone screen rotation
3, Click the settings icon in the lower right corner of the screen
4, Click to open the HUD projection mode of the mobile navigation
5. Click on "Projection" in the lower right corner of the screen.
6, Put the phone on the HUD bracket
Package include : 1 * Smart Phone HUD Head Up projector Display
1. Please allow 1-3cm error due to manual measurement.
2. Please understand that colors may exist chromatic aberration. Thanks for understanding!