1. This machine is suitable for 12V car tires,
2. Also suitable for motorcycles, bicycles, balls, rubber boats, beach floating beds, inflatable toys and so on.
3. When working on the highway, in the field or in the morning, the tires will suddenly leak or the tires will be injected.
4. The correct tire pressure of the car tires can ensure driving safety, save gasoline, and be used with the car, just in case, it is endlessly useful.
5. Equipped with a full set of inflatable nozzles, which can be used to inflate tires, rubber boats, air cushions, inflatable toys, balls and many other purposes.
【Instructions for use】:
1. Insert the air nozzle on the rubber tube head directly on the tire valve. When you hear the sound of air leaking from the tire, it means that the air has circulated. Continue to tighten the air nozzle. At this time, the air will no longer escape.
2. Insert into the DC12V cigarette lighter
3. When inflating, the indicator of the instrument rises with the saturation of the tire. When the pointer reaches the appropriate tire pressure (the tire pressure of a general car tire is 223kpa=35PSI), remove the plug and the air nozzle to complete the work.
4. Please use the professional ball needle and plastic nozzle equipped with the machine to connect with the gas nozzle to inflate the ball and other gas-consuming equipment.
1. It cannot be used to inflate tires of large and overweight vehicles, such as trucks, large trucks, and container trucks;
2. Please use the car engine to increase the power when using it, and do not consume the car battery power;
3. This machine is limited to use DC (DC12V) power supply, and cannot use household high-voltage AC (AC220V) power supply;
4. When inflating, please stop working for 10 minutes after 10 minutes of continuous work to cool down to prevent damage to the air pump and accessories and extend the life of the motor. When the rubber boat is inflated, it can work continuously for 30 minutes;
5. When the normal tire is inflated, it can reach the normal tire pressure of 30PSI in about 3-5 minutes, and the larger tire will be a little longer; if the pointer of the meter rises quickly to 50-100PSI when it starts to inflate, it means that the air is blocked. The air does not enter the tires. At this time, unplug the air nozzle connector and re-operate, otherwise the motor and instrument will be easily damaged.
6. Don't leave the body when using, pay attention to tire pressure at any time, not too saturated;
7. After the machine is used, the air nozzle wrench must be straightened to avoid fatigue of the rubber elasticity inside;
8. The air pump plug is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (fuse is 10A);
9. The machine should avoid moisture, heavy falls and intrusion of sand and mud, and avoid playing with children to avoid damage;
10. The pressure required for each type of tire is different, please refer to the label on the side of the car tire, or ask the car manufacturer
Cable Length: Power Cable 300cm, Tube 50cm
Package include: 1 Set = 1*Inflation Pump, 1*Car Power Cable, 3*Air Nozzle
1. Due to the light difference, the color may be slightly different.
2. Please allow slight differences due to manual measurement.